2016 : The effect of impeller type on silica sol formation in laboratory scale agitated tank
Prof.Dr.Ir. Sugeng Winardi M.Eng
Dr. Tantular Nurtono ST., M.Eng.
Dr.Eng. Siti Machmudah , ST.,M.Eng.
Dr.Eng Widiyastuti ST., MT.
The multiphase polymerization reaction of the silica sol formation produced from silicic acid and potassium hydroxide solutions in laboratory scale agitated tank was studied. The reactor is equipped with four segmental baffle and top entering impeller. The inside diameter of reactor is 9 cm, the baffle width is 0.9 cm, and the impeller position is 3 cm from tank bottom. The diameter of standard six blades Rushton and three blades marine propeller impellers are 5 cm. The silicic acid solution was made from 0.2 volume fraction of water glass (sodium silicate) solution in which the sodium ion was exchanged by hydrogen ion from cation resin. The reactor initially filled with 286 ml silicic acid solution was operated in semi batch mode and the temperature was kept constant in 60 Â°C. The 3 ml/minute of 1 M potassium hydroxide solution was added into stirred tank and the solution was stirred. The impeller rotationalÂ …