2016 : CFD simulation of pulse combustion’s performance

Prof.Dr.Ir. Sugeng Winardi M.Eng


Abstract

This study aims to show changes in the performance of combustion using pulse combustion at specified intervals using simulation. Simulations is performed using Computational Fluid Dynamics analysis (CFD) software Ansys Fluent 15.0. Analysis used 2D illustration axisymmetric with k-ε turbulence models. Propane was selected as fuel at a flow rate of 15 L/min. Air with flow rate of 375 L/min is used as oxidizer. To investigate the advantages of using pulse combustion, the simulated pulse combustion is compared to normal combustion without a pulse. This is done by displaying descriptions of the phenomenon, mechanisms and results output gas combustor. From the analysis of simulation results showed that in 1 minute burning time, burning fuel without requiring pulse as much as 15 L while the pulse combustion requires half of the fuel which is 12.5 L. However, the higher average of temperature was …