2018 : Reduction of P2O5 and F from Phosphogypsum by CaO addition

Ir. Nuniek Hendrianie
Dr. Ir. Sri Rachmania Juliastuti M.Eng


Waste of Phosphoric acid industry, which called phosphogypsum consists of 65% gypsum, 25% water and 10% impurities. Phosphogypsum can only be used up to 15% and the rest is thrown away. The objective purpose of this study is to reduce the content of P2O5 and F using best variable CaO and stirring during coagulation process, flocculation and sedimentation. The method of this experiment is conducted by using the ratio of phosphogypsum and variable distilled water 1:1, 1:2 and 1:3, and then put it into a jar test using the variable stirring of 100 and 150 rpm. Then 11, 12 and 13 gram CaO and 50 ml distilled water is added as variables for coagulation – flocculation process. pH is kept at 6 by adding 4% NaOH. Polyalumunium chloride (PAC) 0.1% as much as 1.75 mg/l is added into the mixture and stirred at 30 rpm for 20 minutes. The separation of P2O5 and F, is done by the sedimentation process. These …