Email:
Department: D. Teknik Kimia
Faculty: Fakultas Teknologi Industri dan Rekayasa Sistem
Affiliations
D. Teknik Kimia
D. Kimia
D. Teknik Kimia Industri
EXPERT MAP
Publications
CONFERENCES
Scopus
11
JOURNALS
21
20
BOOKS
0
RESEARCHS
17
PATENTS
SOCIAL RESPONSIBILITIES
1.
2019 : Enhanced performance of celluloce acetate/polyethylene glycol (CA/PEG) with the addition of functionalized carbon nanotube (CNT) prepared by wet-dry method
2.
2018 : The effect of organosolv pretreatment on optimization of hydrolysis process to produce the reducing sugar
3.
2018 : CO2desorption from activated DEA using membrane contactor with vacuum regeneration technology
4.
2018 : Enhancing Properties and Performance of Cellulose Acetate/Polyethylene Glycol (CA/PEG) Membrane with the addition of Titanium Dioxide (TiO2) by Using Surface Coating Method
5.
2017 : Kinetics study of carbon dioxide absorption reaction into the promoted methyldiethanolamine solution
6.
2017 : Preface: The 3rd International Seminar on Fundamental and Application of Chemical Engineering 2016 (ISFAChE 2016)
7.
2017 : Simulation and modeling CO2absorption in biogas with DEA promoted K2CO3solution in packed column
8.
2017 : Application of dual membrane contactor for simultaneous CO2 removal using continues diethanolamine (DEA)
9.
2015 : Effect of silica particle size in cellulose membrane for desalination process
10.
2015 : Flow pattern and mass transfer characteristics of valve tray in absorption process
11.
2014 : Unusual large-pitch banding in poly(L-lactic acid): Effects of composition and geometry confinement
2011 : Phase behavior and crystal morphology in poly(ethylene succinate) biodegradably modified with tannin
2011 : Phase-separation-induced single-crystal morphology in poly(l-lactic acid) blended with poly(1,4-butylene adipate) at specific composition
2011 : Surface and interior views on origins of two types of banded spherulites in poly(nonamethylene terephthalate)
2011 : Cracks and ring bands of poly(3-hydroxybutyrate) on precrystallized poly(l -lactic acid) template
2011 : Effects of stereocomplex nuclei or spherulites on crystalline morphology and crack behavior of poly(L -lactic acid)
2011 : Lamellar orientation and interlamellar cracks in co-crystallized poly(ethylene oxide)/poly(L-lactic acid) blend
2011 : Effects of crystallinity and molecular weight on crack behavior in crystalline poly(L -lactic acid)
2019 : Study of packed sieve tray column in ethanol purification using distillation process
2018 : Lamellae assembly in dendritic Spherulites of Poly(L-lactic Acid) crystallized with poly(p-Vinyl Phenol)
2016 : Shapes and Origins of Cracks and Correlations with Lamellae Assembly in Poly(L-lactic acid)
2016 : The effect of pretreatment and variety of microorganisms to the production of ethanol from coffee pulp
2015 : Modeling and simulation of CO2 absorption into promoted aqueous potassium carbonate solution in industrial scale packed column
2014 : Oppositely synchronized lamellar bending in poly(L-lactic acid) versus poly(D-lactic acid) blended with poly(1,4-butylene adipate)
2014 : Diversification of spherulite patterns in poly(ethylene succinate) crystallized with strongly interacting poly(4-vinyl phenol)
2013 : Mechanisms of multiple types of lamellae and spherulites in poly(l -lactic acid) interacting with poly(4-vinyl phenol)
2013 : Unconventional non-birefringent or birefringent concentric ring-banded spherulites in poly(L -lactic acid) thin films
2012 : Phase separation and lamellae assembly below UCST in poly(l -lactic acid)/poly(1,4-butylene adipate) blend induced by crystallization
2012 : Surface nanopatterns of two types of banded spherulites in poly(nonamethylene terephthalate) thin films
12.
2012 : Correlation of crack patterns and ring bands in spherulites of low molecular weight poly(l-lactic acid)
13.
2012 : Optical birefringence patterns and corresponding lamellar alteration induced by solvent vapor on poly(l -lactic acid) diluted with poly(1,4-butylene adipate)
14.
2012 : Crystal lamellae of mutually perpendicular orientations by dissecting onto interiors of poly(ethylene adipate) spherulites crystallized in bulk form
15.
16.
17.
18.
19.
20.
21.
2020 : Siti Nurkhamidah, Pengaruh Penambahan Graphene Oxide (GO) pada Kinerja Membran Reverse Osmosis Cellulose Acetate (CA)
2020 : EFISIENSI ENERGI PADA PROSES PEMISAHAN CAMPURAN SIKLOHEKSENA/SIKLOHEKSANA MENGGUNAKAN DISTILASI REAKTIF DAN SIMULASI UNSTEADY STATE-NYA
2020 : OPTIMALISASI PEMANFAATAN LIMBAH INDUSTRI TEPUNG AREN UNTUK PEMBUATAN BIOPLASTIC PLA DEMI MEWUJUDKAN ZERO WASTE INDUSTRY
2019 : Uji Kinerja Kontaktor Membran Hollow Fiber Sebagai Teknologi Baru Untuk Meningkatkan Penyerapan Gas CO2 Dari Gas Buang Industri Untuk Mengendalikan Pencemaran Lingkungan
2019 : Siti Nurkhamidah, Pengaruh Penambahan Graphene Oxide (GO) pada Kinerja Membran Reverse Osmosis Cellulose Acetate (CA)
2019 : Siti Nurkhamidah, Fabrication and Characterization of Biopolymer-based Membrane for Brackish Water Desalination Process
2019 : Rekayasa Semi-batch Bioreactor Produksi Biogas dari Limbah Kulit Kopi dan Kulit Kakao Hasil Pretreatment Alkalin Hidrogenperoksida dan Cairan Rumen
2018 : STUDI PENGGUNAAN PACKED SIEVE TRAY COLUMN PADA PROSES PEMURNIAN ETANOL MELALUI PROSES DISTILASI
2018 : Siti Nurkhamidah, Modifikasi Membran Cellulose Acetate/Polyethylene Glycol (PEG) untuk Menigkatkan Kinerjanya pada Proses Desalinasi
2018 : Uji Kinerja Kontaktor Membran Hollow Fiber Sebagai Teknologi Baru Untuk Meningkatkan Penyerapan Gas CO2 Dari Gas Buang Industri Untuk Mengendalikan Pencemaran Lingkungan
2017 : Pengembangan Kontaktor Membran Hollow Fiber Sebagai Alternatif Teknologi Pemisahan CO2 Dari Gas Buang Industri (Flue Gas)
2017 : Siti Nurkhamidah, Peningkatan Kinerja Membran Cellulose Acetate/Polyethylene Glycol (PEG) dengan Penambahan TiO2 untuk Proses Desalinasi
2016 : Sintesis Material Hibrida Karbon-Silika Dengan Metode Hidrofilikasi Karbon Mesoporous Sebagai Solid Dessicant Pada Proses Dehidrasi Gas Alam
2016 : Siti Nurkhamidah, Fabrication of Cellulose Membrane for the Desalination of Saline Water
2015 : Siti Nurkhamidah, Fabrication of Cellulose Membrane for the Desalination of Saline Water
2014 : Siti Nurkhamidah, Pembuatan Polyurethane Foam dari Bahan Minyak Jarak Pagar (Castor Oil) Menggunakan Blowing Agent yang Ramah Lingkungan.\n
2014 : PEMODELAN DAN SIMULASI ABSORBSI CO2 KEDALAM LARUTAN K2CO3 BERKATALIS PADA ABSORBER SKALA INDUSTRI\n
2020 : LAYANAN PELATIHAN & MAGANG MINYAK ATSIRI UNTUK PENINGKATAN KUALITAS GURU & SISWA SMK – KIMIA
2019 : SOSIALISASI DAN PELATIHAN PEMBUATAN DAN PENINGKATAN KUALITAS GARAM RAKYAT DI KABUPATEN PAMEKASAN
2019 : Ekstraksi Bunga Telang (Clitoria ternatea) dengan Metode Ekstraksi Maserasi menggunakan Pelarut Asam Sitrat
2018 : Pemanfaatan Limbah Tetes Tebu dari Industri Gula di Tulungagung, Jawa Timur
2018 : PEMBUATAN TEH DAN SERBUK DAUN KELOR (Moringa Oleifera) UNTUK KESEHATAN DAN PERBAIKAN NUTRISI BAGI MASYARAKAT DESA SAMBONGGEDE, KECAMATAN MERAKURAK, KABUPATEN TUBAN
2017 : PENGAYAAN MAPEL SCIENCE PADA SISWA SEKOLAH DASAR KELAS IV DAN V DI SEKOLAH DASAR NEGERI \nDI KECAMATAN SUKOLILO SURABAYA
2017 : PELATIHAN PEMBUATAN PRODUK PERSONAL CARE: SHOWER GEL DAN SABUN CAIR BAGI MASYARAKAT KELURAHAN KEPUTIH, KECAMATAN SUKOLILO, SURABAYA
2017 : BUDIDAYA MIKROALGA CHLORELLA VULGARIS DALAM MEDIA AIR LAUT\nDAN AIR TAWAR DI DESA TASIKHARJO, KABUPATEN TUBAN
2016 : IDENTIFIKASI KANDUNGAN BORAKS DAN FORMALIN PADA MAKANAN DENGAN MENGGUNAKAN SCIENTIFIC VS SIMPLE METHODS
2016 : Pelatihan Pembuatan Sabun bagi Masyarakat Kelurahan Keputih, Kecamatan Sukolilo, Surabaya\n
2015 : PENINGKATAN KEMAMPUAN GURU-GURU SMA/SMK \nSE-JAWA TIMUR MELALUI PELATIHAN TEKNOLOGI PENYULINGAN MINYAK ATSIRI\n
