1.

2019 : Micro-Structural Characterization of the bond strength capacity of adhesive material in the alternative of cold-formed steel frame system

2.

2019 : The experimental study of the effect of screw and adhesive connection in the variation of cold-formed roof truss framing system

3.

2018 : Comparison of WF & tubular links on the eccentrically brace frame system due to cyclic loads

4.

2018 : Microstructural Investigation of Reinforced Concrete Exposed to Cyclic Wetting and Drying

5.

2018 : Assessment of vulnerable buildings due to earthquake loading using Rapid Visual Screening smartphone application

6.

2018 : Assessing the Tensile Capacity of Cold-Formed Steel Connections using Self-Drilling Screws and Adhesive Materials

7.

2017 : Investigation of Non-Uniform Rust Distribution and Its Effects on Corrosion Induced Cracking in Reinforced Concrete

8.

2017 : Effect of triangle cables configuration on the behavior of reinforced concrete submerged floating tunnel under hydrodynamic load

9.

2016 : Evaluation of buoyancy weight ratio in submerged floating tunnel under hydrodynamic loads. A case study of seribu Islands

10.

2015 : Axial and flexural performance of adhesive connection on cold-formed steel structures

11.

2015 : Development of structural health monitoring and early warning system for reinforced concrete system

12.

2015 : Effect of vierendeel panel width and vertical truss spacing ratio in staggered truss framing system under earthquake loads

1.

2002 : Improving FE models of a long-span flat concrete floor using natural frequency measurements

1.

2019 : Desain Modifikasi Gedung Fave Hotel Cilacap Menggunakan Metode Flat SLab

2.

2019 : Efektivitas Memordoca Carantia (Pare) Terhadap Penurunan Kadar Glukosa Darah

3.

2019 : Modifikasi Perencanaan Jembatan Sipait Pekalongan dengan Menggunakan Sistem Jembatan Busur Rangka Baja

4.

2019 : Perencanaan Modifikasi Jembatan Kali Legi Menggunakan Busur Baja dengan Lantai Kendaraan Di Tengah (A Half Through Arch)

5.

2018 : Comparison of WF & tubular links on the eccentrically brace frame system due to cyclic loads

6.

2018 : Assessment of vulnerable buildings due to earthquake loading using Rapid Visual Screening smartphone application

7.

2018 : Assessing the tensile capacity of cold-formed steel connections using self-drilling screws and adhesive materials

8.

2018 : Microstructural investigation of reinforced concrete exposed to cyclic wetting and drying

9.

2018 : STATIC FAILURE OF THE ADHESIVE AND COMBINATION JOINTS ON COLD-FORMED STEEL JOINT USING A COHESIVE ZONE MODEL APPROACH

10.

2017 : Concept application for pipelines using a submerged floating tunnel for use in the oil and gas industry

11.

2017 : Cracking process of reinforced concrete induced by non-uniform reinforcement corrosion

12.

2017 : Numerical behavior study of short link, intermediate link and long link in eccentrically braced frame steel structure

13.

2016 : Experiments on snap force in tethers of submerged floating tunnel model under hydrodynamic loads in case of shallow water

14.

2016 : Analysis of corrosion induced crack in reinforced concrete with smeared crack approach

15.

2016 : Non-linear analysis of failure mechanism of steel truss bridge

16.

2016 : Conceptual study of submarine pipeline using Submerged Floating Tunnel